RFC_Unusual_Protocols Rick Frey Consulting Unusual Protocols ChainAuthor: Rick Freyemail: email@example.comLicense:This script has been created for use by the general public and may be used freely.Features:– Drops unusual protocols that should not be present on most networks. /ip firewall filteradd action=jump chain=input comment=”RFC Unusual Protocols” jump-target=”RFC Unusual Protocols”add action=jump chain=forward comment=”RFC […]
Local Network Control Block (22.214.171.124 – 126.96.36.199 (224.0.0/24)) Address(es) Description 188.8.131.52 Base Address (Reserved) 184.108.40.206 All Systems on this Subnet 220.127.116.11 All Routers on this Subnet 18.104.22.168 Unassigned 22.214.171.124 DVMRP Routers 126.96.36.199 OSPFIGP OSPFIGP All Routers 188.8.131.52 OSPFIGP OSPFIGP Designated Routers 184.108.40.206 ST Routers 220.127.116.11 ST Hosts 18.104.22.168 RIP2 Routers […]
Large Block Assignments as per RFC 5771 Address Range Size Designation General Description 22.214.171.124 – 126.96.36.199 (/24) Local Network Control Block Protocol control traffic that is not forwarded off link (local network only.) 188.8.131.52 – 184.108.40.206 (/24) Internetwork Control Block Used for protocol control traffic that MAY be forwarded through […]
Packet Capture Checklist (in .PDF) The packets in this checklist can all be generated using just RouterOS. If you don’t have any MikroTik routers handy, you can create Cloud Hosted Routers (MikroTik routers in a virtual environment) for free. Turn collecting packet captures into a game. Encourage your co-workers and […]
Block Russian Federation by IP Address Copy this script into your router in pieces. There are about 25,000 lines so you will definitely get a buffer overflow if you just paste it into the CLI.
ROSv6/7 Routing Flags ** This list is still being updated ** Flags Meaning ROSv6 ROSv7 Comments A Active X X Route is available for use in the FIB (Forwarding Information Base) S Static X X Route Added Statically C Connected X X Connected Route (i.e. Router has a corresponding IP […]
ROSv7 – OSPF Basic Configuration Introduction In ROSv7 there are both significant improvements and significant changes in the syntax to get OSPF working. For example, OSPF IPv4 and IPv6 are now both configured in the same place (this tutorial will focus on IPv4). This tutorial is using a small WISP […]